Kuang Lung KL 288 Super-Flex Shaft Slim type | Snap Lock

Product: Kuang Lung KL 288 Super-Flex Shaft Slim type

Type: 3/32" and 1/8"

Features:

• Specially designed with extra flexibility, high precision and accuracy.
• Easy/ Quick "S" ecure and "R" ellease mechanism.
• Convenient twist or component construction allows easy and quick handpiece, couple, inner shaff, outer sleeve replacement. 

How-to-apply:

1. Turn off tool and disconnect from powder supply.
2. Holding down the shaft lock button screw the square drive adapter onto the motor shaft and tighten firmly.
3. Screw the flex Shaft onto the powder housing making sure the square end of shaft (inner cable) slides down into the square hole in the square drive adapter.
4. Your handpiece is now ready to insert you bit with the new "SNAP LOCK" mechanism. =>Turn the red-dot on the handpiece to "R" for bit insertion or removal.=> Turn the red-dot on the handpiece to "S" position. Besure to turn enough to "SNAP LOCK" the collet.
5. Before you turn on the tool, make sure the red-dot is in "S" position and the bit is secured. Do not start super-flex shaft when red-dot is in "R" position or without a bit. Otherwise this will cause damage to the flex shaft.